£9.50 DELIVERY CHARGE WHATEVER YOU ORDER (UK MAINLAND)

Wall Plate Mixing Microphone and Analog Audio Extender

The PulseAudio PA-WPMIX Microphone Mixing Extender with dual-gang wall-plate transmitter extends and mixes balanced XLR and unbalanced analog audio signals up to 300m/984ft over a single Cat5e/6 cable. Mixing is done with an easy to use dial on the transmitting wall plate unit that is able to mix audio between the XLR and stereo AUX inputs.

The PA-WPMIX also utilizes PoC (power over cable) technology so that the transmitter can be powered from the receiver with a single power supply allowing for flexibility.

Have more than 2 sources needing to be mixed? No problem as an additional PA-TXMIX (sold separately) can be used and cascaded over a single Cat5e/6 for even larger solutions!

Description

The Wall Plate Mixing Microphone and Analog Audio Extender (PA-WPMIX) includes two units: transmitting unit (PA-TXMIX-WP) and receiving unit (PA-RXMIX). The transmitting unit is used to capture the audio input(s) and carries the signals over a single Cat5e/6 cable. The receiving unit is responsible for converting the audio signals over the Cat5e/6 cable to a balanced XLR and 3.5mm stereo audio outputs.

Wall Plate Mixing Microphone and Analog Audio Extender (PA-WPMIX) Features:

  • Extends balanced XLR and 3.5mm stereo audio over a single Cat5e/6 up to 300m/984ft
  • Dual-gang wall plate Transmitter can be installed into the wall for a clean installation
  • Features Power over Cable (PoC), allowing the extender set to be powered off a single power supply, powered on the receiver end
  • Mixing built in with an easy to use dial to mix between the XLR and stereo AUX inputs
  • Mic input (XLR) and AUX input with balanced level control
  • Supports two types of microphones, Dynamic and Condenser
  • 12V Phantom power option
  • Ability to cascade with connections for additional PA-TXMIX transmitters (sold separately) to add additional sources
  • Dimensions: TX: 5” x 2.9” x 1.6”

 Contents: 

  • PA-WPMIX Extender set
  • 12V Power Supply
  • Mounting screws
  • Product Manual

Pulse Audio (Vanco International) also offer a 2 year-Warranty on Pulse Audio products.

Resources

Specifications

  • Extends balanced XLR and 3.5mm stereo audio over a single Cat5e/6 up to 300m/984ft
  • Dual-gang wall plate Transmitter can be installed into the wall for a clean installation
  • Features Power over Cable (PoC), allowing the extender set to be powered off a single power supply, powered on the receiver end
  • Mixing built in with an easy to use dial to mix between the XLR and stereo
  • AUX inputs
  • Mic input (XLR) and AUX input with balanced level control
  • Supports two types of microphones, Dynamic and Condenser
  • 12V Phantom power option
  • Ability to cascade with connections for additional PA-TXMIX transmitters (sold separately) to add additional sources
  • Dimensions: TX: 5” x 2.9” x 1.6” (126mm x 73mm x 41mm); RX: 3.4” x 2.9” x 1.6” (86mm x 73mm x 41mm)

Videos

PulseAudio

In 2016, Vanco International introduced PulseAudio™, an amplifier and audio accessories line made for residential and commercial audio distribution.

The PulseAudio line has continued to expand to include easy-to-integrate amplifiers and audio distribution solutions such as streaming receivers, audio signal extenders and converters, speaker selectors, and volume controls. This selection of value-priced devices is developed based on input from the Vanco customer community, allowing distributors to offer targeted, affordable solutions for both commercial and residential audio systems.